The board Size it is means board’s length and width. If it is round ,it will be Diameter. If it is the special outsize, will follow the largest range. All board size have tolerance, generally standard tolerance will be +/-0.2mm.If you beyond this range, please remarks when order. Otherwise will follow our standard .If you have question, please contact our us at sales@tendtronic.com.
The layer of the boards. The system just provide 1-10layer’s price. So for more higher ,please contact our sales directly. More higher layer, more higher price .
The quantities always the panel. For example ,if you have 4pcs in one panel ,you need 12pcs, you must quote for 3panle here .Not 12,thank you .
Panelization refers to different boards put in one folder or compression package,then each board style will charged USD10 more. If it's the same board jointed in one panel,that will be free.
Board thickness is the thickness of the boards. Stand tolerance is +/-10%.This 10% cause by the solder mask and copper plating. If you have special requirement, please remarks when order. Our stand thickness is 0.8-1.6mm,if exceed this or below, will take extra fees. If you have question, please contact our us at sales@tendtronic.com.
Soldermask color is the color of the board surface. we can provide many color, chose one you need. if you have other special require, please contact our us at sales@tendtronic.com.
Silkcreen color means the color of the legend on the boards ,we only provide two color in system, please have special demand, please contact our us at sales@tendtronic.com.
Surface Treatment is try to meet products corrosion resistance, abrasion resistance, decoration or other special functional requirements. Please choose according to your demands. please have special demand, please contact our us at sales@tendtronic.com.
Need pay high attention. If you had Gerber files, will follow the Gerber files whether you choose plugged or covered. Since in Gerber files, it is hard to distinguish. so just can follow the Original Gerber files. If you have doubts, please contact us at sales@tendtronic.com.
Flying probe test will need test cost for future repeat order. Fixture test will no need test cost for future test cost
OZ is the weight unit, 1OZ = 28.35Gram, we use OZ to indicate the thickness of copper foil, the thickness is 35um when spread 1OZ copper on one square foot, 2OZ represents 70um copper thickness.
2Layer standard delivery time is 3-4days,if choose urgent, will need extra fees. If you have doubts, please contact us at sales@tendtronic.com
The full board are by only one single board or be arrayed with the same or different PCBs.Please leave us a message if need tendtronic to panelization for you。E.g. Panel in 2*3, size of the break-away rail, total 5 panels=total 30 individual boards.The extra cost is USD6/order.
Thickness 0.1-0.15mm: Base on the pad spacing .Standard:0.12mm Type:Framed 28.0cm * 38.0cm Non framed
For the standard shipping, we use DHL in system, if you require Fedex,UPS or other ways, please contact us at sales@tendtronic.com.